About Products
150yds – 200yds (350m) with variable focus from spot to flood and three power settings – high/med/low.
We have offered 3 size adapter for choice (42mm/45mm/48mm). 42mm adaptor should be used for scopes with an external eyepiece diameter of 41.7-48mm, and 45mm adaptor for external eyepiece diameter of 38.7-43.4. 48mm adaptor for external eyepiece diameter of 41.7-46.4.
“There is an auxiliary reticle. You can aligned with the center of cross line of day time scope by adjusting the X/Y values.
(detailed operation tips: Press the “”OK”” button to enter the sub-page, press “”+”” or “”-“” to adjust the Y value; press the IR menu button to adjust the X value to adjust the sub-line in the optical telescope to the center of the display.)”
To zero your thermal scope follow the steps below:
- Set the target so that the device can obtain a good image.
- Select the reticle adjustment option from the main menu.
- Fire a 1st shot after focusing on the image, ensuring that you can see a clear point of impact on the display screen after the shot has been taken.
- Keep the device in a stable position, then press [+/-] to freeze the screen.
- To adjust the “zero” value — move the crosshair on the screen display towards the point of impact by adjusting “X” and “Y” values.
- Set the “SAVE” item to “Y”, after the setting is completed, press and hold the [Menu] button to save and exit.”